Hand Valve – 208-E


SKU: N/A Category:


Our hand expansion valves are available in a globe design to work with pipe sizes from ¼” to 1 ¼” and in an angle design to work with pipe sizes from ¼” to 1”. They come with zinc-plated carbon steel (-CS) or stainless steel (-SS) stems. The valve body materials are ductile iron or C.I. 40 and are pressure tested for leakage after assembly.

Angle Hand Expansion Valve Specifications
Catalog Number 208-E
Pipe Size 1/2”
Orifice 1/4”
Weight, lbs 3
A – Center to Side Face 1 1/2”
D – Center to Top of Wheel (open) 1 7/8”
E – Center to Bottom Face 5 5/8”

Additional Information

  • The valve body has a tapered orifice through a raised seat. Needle point and fine pitch stem threads allow close regulation of flow.
  • All expansion valves are equipped with T-handles to distinguish them from shut-off valves.
  • The packing ring chamber is of special design: It is machined so that sealing is necessary only around the stem proper.
  • The composition packing ring is impregnated with graphite for ease of operation and will not deteriorate in service.

Additional information


Carbon Steel Stems, Stainless Steel Stems

Copyright © 2024. All Rights Reserved.
JLB - Nashville Web Design & SEO Services