Description
Needle point valves are of all steel construction and all parts are zinc plated. They are available in angle or tee design to work with pipe sizes from ¼” to ¾”. The valves are equipped with a tapered orifice through the seat and a corresponding taper on the stem, thus assuring a measured flow through the valve. The stems are machined with a fine pitch thread which permits close regulation. The handles used are Tee-shaped so that the valves can be easily distinguished from regular shut-off valves.
| Needle Point Valve Specifications - Angle | |
|---|---|
| Catalog Number | 424 |
| Pipe Size | ¾” |
| Weight, lbs | 2 ¾ |
| A – Center to Side Outlet | 1” |
| B – Face to Face | 2” |
| C – Center Side Outlet to Top (open) | 5 3/8” |
| D – Center Outlet to Bottom Face | 1 13/16” |
