Hand Valve – 426



Needle point valves are of all steel construction and all parts are zinc plated. They are available in angle or tee design to work with pipe sizes from ¼” to ¾”. The valves are equipped with a tapered orifice through the seat and a corresponding taper on the stem, thus assuring a measured flow through the valve. The stems are machined with a fine pitch thread which permits close regulation. The handles used are Tee-shaped so that the valves can be easily distinguished from regular shut-off valves.

Needle Point Valve Specifications - Tee
Catalog Number 422
Pipe Size 3/8”
Weight, lbs 1
A – Center to Side Outlet 23/32”
B – Face to Face 1 7/16”
C – Center Side Outlet to Top (open) 3 7/8”
D – Center Outlet to Bottom Face 1 3/8"

Copyright © 2024. All Rights Reserved.
JLB - Nashville Web Design & SEO Services